★ Gewild
⬡ Vlekvrye Staal Hopper
⬡ Vlekvrye Staal Uitgoter
20 Reeks
🇿🇦 Suid-Afrikaans Vervaardig
Gebou om te Bly.
Built in Vlekvrye Staal.
Die LEO 20 Reeks misverspreider lewer kommersiële-graad werkverrigting met 'n vlekvrye staal hopper en uitgoter —ineered to handle the toughest spreading conditions with zero compromises. Larger modelle add full SS construction: uitgoter throat, side walls, and front and rear panels.
6
Modelle
3,700–16,000L
978–4,225 gal Range
SS
Hopper & Uitgoter
120
Heavy Kett (vs 100)
Fab'd
Improved Hamers
Side
Afvoer — All Modelle
Premium Construction
Vlekvrye Staal Hopper & Uitgoter
Die LEO 20 Reeks sny nie hoeke op materiaalkontak-oppervlaktes nie. Alle modelle beskik oor 'n vlekvrye staal hopper, uitgoter, and uitgoter shroud. The 2010–2016 go further — adding full SS uitgoter throat, side walls, and front and rear panels vir die mees corrosion-resistant spreader in sy klas.
Vlekvrye Staal
Uitgoter Shroud
The vlekvrye staal uitgoter shroud bottom surface eliminates material buildup, corrosion, and ensures smooth, frictionless discharge from auger to uitgoter — every single load, every single time.
Vlekvrye Staal
Uitgoter Throat
The uitgoter throat — where material transitions van die snek stelsel to the high-speed discharge uitgoter — is fully lined in vlekvrye staal to prevent wear, corrosion, and clogging at the highest-impact zone.
Vlekvrye Staal
Side Wands
Vlekvrye Staal steel side walls throughout the hopper mean no rust bleeding, no material sticking, and a dramatically longer diens life vergelykd to painted or galvanized alternatives that fail under repeated acid manure exposure.
Vlekvrye Staal
Front Panel
The front panel faces constant material pressure and splash-back. Our vlekvrye staal front panel holds up season after season without the paint failure and rust that plague conventional steel spreaders.
Vlekvrye Staal
Rear Panel
The rear panel endures the heaviest mechanical wear as the apron chain pushes material forward. A vlekvrye staal rear panel ensures years of reliable bedrywigheid without the premature deterioration of standard mild steel.
Full Package
Vlekvrye Staal Hopper & Uitgoter
Every 20 Reeks machine starts with a vlekvrye staal hopper and uitgoter. Step up to the 2010–2016 and you get full SS construction — all five critical panels including the uitgoter throat, side walls, and front and rear panels — making it the most corrosion-resistant spreader in sy klas.
Versoek Pryse
Head-to-Head
LEO vs Competitor — Deur & Uitgoter
Die deuropening bepaal hoe vinnig materiaal na die uitgoter beweeg. Meer oop area per eenheidskapasiteit beteken minder beperkingiction and higher deurset. See how LEO stacks up.
| Spesifikasie | Comp. SL 110 1,000 gal |
LEO 1006 ~978 gal |
Comp. SLC 126 2,600 gal |
LEO 2010 2,640 gal |
Comp. SLC 232 3,200 gal |
LEO 2012 3,200 gal |
Comp. SLC 241 4,100 gal |
LEO 2016 4,200 gal |
|---|---|---|---|---|---|---|---|---|
| Hamers | 12 | 15 | 18 | 15 | 18 | 15 | 18 | 15 |
| Uitgoter Swing Dia. | 20" | 22" ✓ | 20" | 22" ✓ | 20" | 22" ✓ | 20" | 22" ✓ |
| Deur Hoogte (A) | 18" | 21" ✓ | 18" | 21" ✓ | 18" | 21" ✓ | 18" | 21" ✓ |
| Deur Breedte (B) | 30" | 42" ✓ | 47" | 42" | 47" | 42" | 47" | 42" |
| Deur Area (C) sq in | 540 | 882 ✓ | 846 | 882 ✓ | 846 | 882 ✓ | 846 | 882 ✓ |
| In. per Hamer (W÷H) | 2.50" | 2.80" ✓ | 2.61" | 2.80" ✓ | 2.61" | 2.80" ✓ | 2.61" | 2.80" ✓ |
| Deur Area / Kapasiteit | 54% | 90% ✓ | 33% | 34% ✓ | 26% | 28% ✓ | 21% | 21% |
| Construction Spesifikasies | ||||||||
| Uitgoter As Dia. | 2" | 2.5" ✓ | 2.5" | 2.5" | 2.5" | 2.5" | 2.5" | 2.5" |
| Snek Flighting | .375" | .400" ✓ | .375" | .400" ✓ | .375" | .400" ✓ | .375" | .400" ✓ |
| Hopper Bottom | .179" | .250" ✓ | .179" | .375" ✓ | .25" | .375" ✓ | .25" | .375" ✓ |
| Side Panels | .135" | Mild Steel ✓ | .179" | Vlekvrye Staal ✓ | .250" | Vlekvrye Staal ✓ | .250" | Vlekvrye Staal ✓ |
| Spindle Diameter | 2.5" | 3" ✓ | 2.5" | 4" ✓ | 3.75" | 4" ✓ | 4.5" | 5" ✓ |
| Hubs | 8-Bout | 8-Bout | 8-Bout | HD 10-Bout ✓ | HD 10-Bout | HD 10-Bout | HD 10-Bout | HD 10-Bout |
1
Same door area, 3 fewer hammers. The LEO achieves the same or greater door opening area as competitors while using 3 fewer hammers — resulting in better balance, less rotating weight, and lower vibration.
2
Reverse auger flighting at door. An extra piece of reverse auger flighting in front of and behind the door creates pressure in the middle — forcing material out faster and more evenly.
3
22" uitgoter diameter — more tip velocity. A larger swing diameter produces more velocity at particle kontak. Extra velocity, heavier hammer weight, and lower rotational speed creates a better-performing uitgoter with less vibration.
4
Dynamically balanced uitgoter. The LEO uitgoter is dynamically balanced — reducing vibration, extending bushing life, and maintaining consistent werkverrigting across the full diens life of the machine.
5
Square hammer tip, competitor is rounded. The LEO hammer tip is wider and square — maintaining a perpendicular impact plane throughout its full arc. Competitor rounded hammers lose doeltreffendheid as kontak angle shifts.
6
Same shaft on elke model. LEO uses the same uitgoter shaft on all machines — 2.5" across the entire lynbelyning — simplifying parts, reducing inventory, and proving the ontwerp is engineered right from the start.
Kettingaandrywing Voordeel
Heavier Ketts Than the Competition — Standaard.
Die LEO 2010–2016 kettingaandrywingstelsel is 'n volle graad gespesifiseer bo wat mededingers "swaar" noem. Elke kettingposition uses a stronger, larger pitch chain to handle the relentless demands of kommersieel daily spreading.
| Kett Position | LEO 20 Reeks | Competitor Standaard | LEO Voordeel |
|---|---|---|---|
| Top Snek Kett | #120 Kett | #100 Kett | 2 Grades Heavier |
| Lower Snek Kett | #120 Kett | #100 Kett | 2 Grades Heavier |
| Intermediate #2 | #100 Kett | #80 Kett | 1 Grade Heavier |
| Intermediate #1 | #80 Kett | #80 / #60 Kett | Matched or Heavier |
#120
Highest-Load Positions
Both top and lower auger chains — the two hardest-working positions in the machine — run #120 pitch chain where competitors spesifikasies only #100. This means more metal, more strength, more life per chain.
Oil Bath
Afdichtinged Kett Protection
All chains on the 2010–2016 run in a sealed oil bath enclosure — continuously lubricated, protected from contamination, and dramatically extending chain diens life vergelykd to exposed alternatives.
Less
Downtime, More Uptime
Heavier chains stretch less, wear slower, and handle shock loads better. When spreading season is short, you need a machine that keeps running — not one that breaks a chain mid-land.
Kett drive stelsel applies to 2010, 2012, 2014, and 2016 modelle. 1006 and 1008 use single snek-aandrywing stelsel.
Why Sy-Afvoer?
Sy-Afvoer Voordele & Improvements
LEO se 20 Reeks sy-afvoer ontwerp lewer presisie veld-aanwending en operasionele voordele wat agter-afvoer ontwerpe nie kan ewenaar nie. simply can't match — purpose-built for modern plaass that demand doeltreffendheid and control.
Dual Snek Material Flow
The 20 Reeks sy-afvoer uses two horizontal augers working in coordination. The top auger continuously moves material rearward while the lower auger consistently supplies the uitgoter with an even, metered flow — preventing surge loading and delivering a precise, reliable verspreidingstempo every pass.
Nee Surge Loading
Even Flow Rate
Dual Snek Ontwerp
Precise Roadside & Berm Application
Side discharge gives operators the ability to spread precisely along fencerows, roadsides, and berms without turning — spreading exactly where it's needed with no overshoot. This means tighter headlands, less waste, and significantly better nutrient placement on irregular lands.
Fencerow Application
Nee Overshoot
Tight Headlands
Oil Bath Kett Protection
All chains run inside a sealed oil bath enclosure — dramatically extending chain life, reducing maintenance intervals, and eliminating the constant re-greasing that exposed chains demand.
Dynamically Balanced Uitgoter
The uitgoter is precision-balanced to minimize vibration at high TPM — protecting bearings, reducing structural stress, and ensuring consistent spread width across the full kapasiteit range.
Standaard Splash Beskermkaps
Ingesluit splash guards and an uitgoter deflector shield protect the trekker, operator, and surrounding areas while maintaining maximum spread distance and pattern uniformity.
Low Maintenance Ontwerp
Fabricated hammers, vlekvrye staal kontak surfaces, and sealed kettingaandrywing combine to deliver a spreader that spends far more time in the land and far less time in the shop — maximizing your ROI season after season.
Consistent Verspreidingspatroon
Metered dual-auger delivery combined with the high-speed uitgoter ensures a reliable, repeatable verspreidingspatroon — giving you confidence in even nutrient distribution across every acre, every pass.
Wide Spread Breedte
The high-velocity uitgoter delivers an impressive spread width for its class — reducing the number of passes required per land, saving time, reducing fuel consumption, and minimizing kompakion.
Full Lynbelyning
Choose Your 20 Reeks Model
Six modelle spanning 3,700L to 16,000L — find the right kapasiteit for your bedrywigheid.
20 SERIES
LEO 1006
Sy-Afvoer · SS Hopper & Uitgoter
Kapasiteit
3,700L / ~978 gal
Min PK Req.
~70 PK
Afvoer / Aandrywing
Sy-Afvoer · Single Snek
Kompak sy-afvoer spreader with the same vervaardigde hamers as the large machines. Large door opening delivers superior ability to handle pen-gepackte mis with ease.
20 SERIES
LEO 1008
Sy-Afvoer · SS Hopper & Uitgoter
Kapasiteit
Kontak LEO
Min PK Req.
~90 PK
Afvoer / Aandrywing
Sy-Afvoer · Single Snek
Steps up from the 1006 with increased kapasiteit and the same sy-afvoer ontwerp. Large door opening and vervaardigde hamers handle pen-gepackte mis that would bog down lesser machines.
20 SERIES
GEWILDSTE
LEO 2010
Sy-Afvoer Misverspreider · SS Hopper & Uitgoter
Kapasiteit
10,000L / 2,640 gal
Min PK Req.
~110 PK
Afvoer
Sy-Afvoer Uitgoter
The 2010 brings serious sy-afvoer kapasiteit to kommersieel dairy and bees bedrywighede. Vlekvrye Staal steel hopper and uitgoter, dual auger flow, and precision spreading for 10,000L loads.
20 SERIES
VLAGSKIP
LEO 2012
Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
Kapasiteit
12,000L / 3,170 gal
Min PK Req.
~130 PK
Afvoer
Sy-Afvoer Uitgoter
At 12,000L / 3,170 gal, the 2012 is purpose-built for high-output kommersieel suiwelbedrywighede. Engineered for demanding daily spreading schedules with full SS construction throughout.
20 SERIES
LEO 2014
Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
Kapasiteit
14,000L / 3,700 gal
Min PK Req.
~150 PK
Afvoer
Sy-Afvoer Uitgoter
Stepping into true large-scale bedrywigheid, the 2014 handles 14,000L / 3,700 gal loads with authority. Ontwerped for contract spreading and high-volume kommersieel dairy and voerkraal bedrywighede.
20 SERIES
LEO 2016
Vlagskip Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
Kapasiteit
16,000L / 4,225 gal
Min PK Req.
~170 PK
Afvoer
Sy-Afvoer Uitgoter
The largest standard 20 Reeks model — 16,000L / 4,225 gal flagship kapasiteit for maximum-deurset kommersieel bedrywighede. Vlekvrye Staal steel hopper and uitgoter, built to dominate the biggest spreading jobs.
Detailed Spesifikasies
Select a model to view full spesifikasies
LEO 1006
Sy-Afvoer · SS Hopper & Uitgoter · Single Snek
| Kapasiteit | 3,700L / ~978 gal |
| Min Trekker PK | ~70 PK |
| Afvoer Type | Sy-Afvoer |
| Snek Stelsel | Single Snek-Aandrywing |
| Deur Opening | Large — Pen-Packed Ready |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard (.250") |
| Side Panels | Mild Steel |
| Front Panel | Mild Steel |
| Rear Panel | Mild Steel |
| Hopper Bottom | .250" Steel |
| Snek Flighting | .400" |
| Uitgoter As | 2.5" Diameter |
| Uitgoter Swing Dia. | 22" |
| Hamers | 15 — Fabricated, Hardfaced |
| Deur Opening (H × W) | 21" × 42" (882 sq in) |
| Spindle Diameter | 3" |
| Hubs | 8-Bout |
| Kettingaandrywing | Standaard (Nee Oil Bath) |
| Splash Beskermkaps | Opsioneel |
Why the 1006?
- ✓Side discharge + 22" uitgoter — same ontwerp as larger machines
- ✓21" × 42" door opening — outstanding pen-gepackte mis flow
- ✓15 hardfaced vervaardigde hamers — same spesifikasies as all 20 Reeks modelle
- ✓SS hopper, uitgoter & shroud — no corrosion at the discharge zone
LEO 1008
Sy-Afvoer · SS Hopper & Uitgoter · Single Snek
| Kapasiteit | Kontak LEO for Spesifikasies |
| Min Trekker PK | ~90 PK |
| Afvoer Type | Sy-Afvoer |
| Snek Stelsel | Single Snek-Aandrywing |
| Deur Opening (H × W) | 21" × 42" (882 sq in) |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard (.250") |
| Side Panels | Mild Steel |
| Front Panel | Mild Steel |
| Rear Panel | Mild Steel |
| Hopper Bottom | .250" Steel |
| Snek Flighting | .400" |
| Uitgoter As | 2.5" Diameter |
| Uitgoter Swing Dia. | 22" |
| Hamers | 15 — Fabricated, Hardfaced |
| Spindle Diameter | 3" |
| Hubs | 8-Bout |
| Kettingaandrywing | Standaard (Nee Oil Bath) |
| Splash Beskermkaps | Opsioneel |
Why the 1008?
- ✓Side discharge — same ontwerp as the large kommersieel machines
- ✓Large door opening — handles pen-gepackte mis with ease
- ✓Same vervaardigde hamer as large modelle — cuts hay, lasts longer
- ✓Vlekvrye Staal steel hopper and uitgoter — zero corrosion, no buildup
LEO 2010
Sy-Afvoer Misverspreider · SS Hopper & Uitgoter
| Kapasiteit | 10,000L / 2,640 gal |
| Min Trekker PK | ~110 PK |
| Afvoer Type | Sy-Afvoer Uitgoter |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard |
| SS Uitgoter Throat | Standaard |
| SS Side Wands | Standaard |
| SS Front & Rear Panel | Standaard |
| Snek Stelsel | Dual Horizontal Sneks |
| Hamer Type | Fabricated (Improved) |
| Kettingaandrywing | Oil Bath (Afdichtinged) |
| Splash Beskermkaps | Standaard |
| Uitgoter Deflekteerder | Standaard |
Why the 2010?
- ✓Full SS hopper and uitgoter — no corrosion, no buildup
- ✓Side discharge precision — spread exactly where needed
- ✓Dual auger metered flow — consistent verspreidingstempo
- ✓Fabricated hammer cuts hay and handles abrasives
LEO 2012
Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
| Kapasiteit | 12,000L / 3,170 gal |
| Min Trekker PK | ~130 PK |
| Afvoer Type | Sy-Afvoer Uitgoter |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard |
| SS Uitgoter Throat | Standaard |
| SS Side Wands | Standaard |
| SS Front & Rear Panel | Standaard |
| Snek Stelsel | Dual Horizontal Sneks |
| Hamer Type | Fabricated (Improved) |
| Kettingaandrywing | Oil Bath (Afdichtinged) |
| Splash Beskermkaps | Standaard |
| Uitgoter Deflekteerder | Standaard |
Why the 2012?
- ✓Kommersieel-grade 12,000L kapasiteit for high-output dairy
- ✓Vlekvrye Staal steel hopper and uitgoter — zero corrosion
- ✓Side discharge for precise fencerow and berm spreading
- ✓Fabricated hammer — handles hay, straw, and abrasives
LEO 2014
Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
| Kapasiteit | 14,000L / 3,700 gal |
| Min Trekker PK | ~150 PK |
| Afvoer Type | Sy-Afvoer Uitgoter |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard |
| SS Uitgoter Throat | Standaard |
| SS Side Wands | Standaard |
| SS Front & Rear Panel | Standaard |
| Snek Stelsel | Dual Horizontal Sneks |
| Hamer Type | Fabricated (Improved) |
| Kettingaandrywing | Oil Bath (Afdichtinged) |
| Splash Beskermkaps | Standaard |
| Uitgoter Deflekteerder | Standaard |
Why the 2014?
- ✓14,000L kapasiteit for large-scale kommersieel spreading
- ✓Vlekvrye Staal steel hopper and uitgoter — oorleefs the land
- ✓Ideal for contract spreaders and large suiwelbedrywighede
- ✓Improved vervaardigde hamer — higher velocity, less downtime
LEO 2016
Vlagskip Kommersieel Sy-Afvoer · SS Hopper & Uitgoter
| Kapasiteit | 16,000L / 4,225 gal |
| Min Trekker PK | ~170 PK |
| Afvoer Type | Sy-Afvoer Uitgoter |
| Hopper | Vlekvrye Staal |
| Uitgoter | Vlekvrye Staal |
| SS Uitgoter Shroud | Standaard |
| SS Uitgoter Throat | Standaard |
| SS Side Wands | Standaard |
| SS Front & Rear Panel | Standaard |
| Snek Stelsel | Dual Horizontal Sneks |
| Hamer Type | Fabricated (Improved) |
| Kettingaandrywing | Oil Bath (Afdichtinged) |
| Splash Beskermkaps | Standaard |
| Uitgoter Deflekteerder | Standaard |
Why the 2016?
- ✓Vlagskip 16,000L / 4,225 gal — maximum standard kapasiteit
- ✓Vlekvrye Staal steel hopper and uitgoter throughout
- ✓Built for contract spreading and kommersieel voerkraal bedrywighede
- ✓Higher tip velocity hammer — maximum deurset werkverrigting
Side-by-Side Vergelyking
All 6 modelle at a glance — scroll right on mobile
| Spesifikasie | 1006 | 1008 | 2010 | 2012 | 2014 | 2016 ★ |
|---|---|---|---|---|---|---|
| Kapasiteit (Liters) | 3,700L | Kontak LEO | 10,000L | 12,000L | 14,000L | 16,000L |
| Kapasiteit (Liters / Gal) | 3,700L ~978 gal |
Kontak LEO — |
10,000L 2,640 gal |
12,000L 3,170 gal |
14,000L 3,700 gal |
16,000L 4,225 gal |
| Min PK Required | ~70 PK | ~90 PK | ~110 PK | ~130 PK | ~150 PK | ~170 PK |
| Afvoer Type | Sy-Afvoer | Sy-Afvoer | Sy-Afvoer | Sy-Afvoer | Sy-Afvoer | Sy-Afvoer |
| Snek Stelsel | Single Snek | Single Snek | Dual Snek | Dual Snek | Dual Snek | Dual Snek |
| Deur Opening | Large | Large | Standaard | Standaard | Standaard | Standaard |
| SS Hopper | Opsioneel | Opsioneel | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| SS Uitgoter | ✓ Std | ✓ Std | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| SS Uitgoter Shroud | ✓ .250" | ✓ .250" | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| SS Uitgoter Throat | — | — | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| SS Side Wands | Mild Steel | Mild Steel | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| SS Front & Rear Panel | Mild Steel | Mild Steel | ✓ Std | ✓ Std | ✓ Std | ✓ Std |
| Hamer Type | Fabricated | Fabricated | Fabricated | Fabricated | Fabricated | Fabricated |
| Kettingaandrywing | Standaard (Nee Oil Bath) |
Standaard (Nee Oil Bath) |
Oil Bath (Afdichtinged) |
Oil Bath (Afdichtinged) |
Oil Bath (Afdichtinged) |
Oil Bath (Afdichtinged) |
| Top Snek Kett | — | — | #120 | #120 | #120 | #120 |
| Lower Snek Kett | — | — | #120 | #120 | #120 | #120 |
| Intermediate #2 Kett | — | — | #100 | #100 | #100 | #100 |
| Intermediate #1 Kett | — | — | #80 | #80 | #80 | #80 |
HP requirements and select spesifikasies are estimated. Kontak LEO Landbou at (608) 420-5085 or info@leoagriculture.com for confirmed spesifikasies on all modelle.
Get Pryse
Ready to Put the LEO 20 Reeks
Ready to Put the LEO 20 Reeks
to Work on Your Bedrywigheid?
Praat met ons span oor die regte model vir u kapasiteitsbehoeftes. Vlekvrye staal hopper en uitgoter — gebou om te bly every load, every season.
